How can a Bringme Box be restarted using the Box Repower Module (BRM)?

🔎 Introduction

Some Bringme Boxes have a Box Repower Module (BRM). This lets you restart the Box yourself by holding your hand against the glass in the bottom right corner of the screen, without unplugging anything. This article explains how to use it.

Not every Bringme Box has a BRM installed. If nothing happens after a few tries, this feature is probably not available on your Box.

📃 Answer

1. Stand in front of the Bringme Box and locate the bottom right corner of the screen.
2. Make sure your hand is clean and dry.
3. Hold your hand flat against the glass in that corner for 5 to 10 seconds. The screen will turn off as the Box powers down.

4. Wait about 10 seconds. The Box restarts automatically and the screen lights up again.

💡 Tip: once the screen is back on, give the Box a moment to fully reload before using it again.

Still not working?

• Make sure you are holding your hand firmly against the glass, not just near it.
• Try the full 5 to 10 seconds again.
• If nothing happens after several attempts, this Box likely does not have a BRM installed. In that case, see what to do if the Bringme Box is out of service.

Still have questions?

Ask Jaimie, the AI Agent of Bringme. Jaimie answers your questions about Bringme 24 hours a day and passes your question on to our team whenever that is needed. You will find Jaimie in the Bringme App, in the web version of the Bringme App and after logging in via bringme.com.

💡 Tip: Jaimie is still learning, so your feedback at the end of a conversation is very welcome.