What internet router configurations are recommended for optimal MeetMe App performance?

🔎Introduction

To ensure the best performance of the Meet Me App, it’s crucial to optimize your internet router settings. This article outlines the key configurations to check and adjust for a smoother app experience.

📃Answer

For optimal functionality of the Meet Me App, please verify and adjust the following settings on your internet router:

1. Ensure SIP ALG (Session Initiation Protocol Application Layer Gateway) is disabled:

   • SIP ALG can interfere with VoIP and app functionality. Make sure it is turned off on your router.

2. Turn off UPnP (Universal Plug and Play):

   • Disable UPnP on your router to avoid any potential conflicts with the Meet Me App.

3. Disable CGNAT (Carrier-Grade Network Address Translation):

   • CGNAT can affect the app’s ability to function properly. If you are unable to disable CGNAT, you may need to contact your internet provider for assistance.

4. Verify that port 5060 is open for both UDP (User Datagram Protocol) and TCP (Transmission Control Protocol):

   • Port 5060 is necessary for SIP communication. Ensure that it is open for both UDP and TCP protocols on your router.

5. Confirm a minimum upload bandwidth of 3Mbit/sec is available:

   • A stable upload speed of at least 3Mbit/sec is required for proper video and audio performance in the app.

6. Restart your router:

   • After making the above changes, restart your apartment’s internet router to apply the settings and ensure everything functions smoothly.

By adjusting these settings, you’ll help ensure that the Meet Me App runs efficiently and provides the best user experience.