How to restart a Bringme Home Control?

🔎Introduction

This guide explains how to restart a Bringme Home Control by removing it from the wall and disconnecting and reconnecting the RJ45 network cable. This procedure is helpful for resolving connection issues or other technical malfunctions. You don't need tools or spare parts to restart the Bringme Home Control

📃Answer

Step 1: Remove the device from the wall

• To remove the Bringme Home Control from the wall, gently push the device upwards. This will release it from the mounting bracket.
• Once it's detached, you can safely take it off the wall.
• If it feels stuck, ensure there’s no obstruction or debris around the mounting points.

Step 2: Disconnect the RJ45 cable

• Locate the network cable (RJ45) at the back of the device.
• Gently pull the cable out of the port.

Step 3: Reconnect the RJ45 cable

• Firmly reinsert the network cable into the port until you hear a click.
• Ensure the cable is securely connected.

Step 4: Reattach the device

• To reinstall the Home Control on the wall, align it with the wall mount, gently press it against the wall, and slide it downwards until it is securely into place.
• Ensure it is properly aligned to avoid any damage or misplacement.
• If you encounter any issues, double-check the mount for obstructions.

✅Quality check

Step 1: Verify the connection

• Check if the Bringme Home Control is functioning correctly.
• This can be done by confirming the device responds to commands or reconnects to the network.

Step 2: Inspect the cable connection

• Make sure the RJ45 cable is securely plugged in without any looseness.

Step 3: Confirm proper installation

• Ensure the device is firmly and straightly mounted back on the wall.

Your Bringme Home Control has now been successfully restarted!